Shade S Aluminium - DT00

Quick code: 10227

Shade S is a new metallic decorative paint which is a combination of a smooth and textured finish. With its shimmering richness, unique contrasts and reflections, Shade S is ideal for contemporary and sophisticated interior designs or feature walls.

Order a Free Sample Paint Calculator

Paint Calculator

  1. 1. Area to cover in m2

  2. 2. If you don't know the area to cover in m2

Availability: In stock

£0.00

* Required Fields

  • 7m2 per Litre
  • Adi Services
  • Delivery
  • Easy Application
  • Quick Dry

Description

Details

Shade S is a new metallic decorative paint which is a combination of a smooth and textured finish. With its shimmering richness, unique contrasts and reflections, Shade S is ideal for contemporary and sophisticated interior designs or feature walls. It is available in three different base colours, Gold, Silver and Aluminium that can in addition be easily tinted to a broad range of shades.

How to Apply

  • Intended use: for appropriately treated interior walls, either Gypsum plaster based or rendered masonry.
  • Surface preparation: the surface must be clean, dry, smooth, uniform and free from peeling paint. For new walls, old powdery walls or in presence of weak paint: apply a coat of Adifix primer thinned as specified on the relative data sheet.
  • Application:
    1. Apply by roller or brush 1 or 2 basecoats of Fondo Universale - Tinted tinted with the same tone you would use for the finish and thinned 20-30% with water.
    2. Allow the basecoat to dry for approximately 5-6 hours before applying the Shade finish.
    3. When the basecoat is completely dry, apply Shade S in the desired effect, as described below. Proceed this way until total coverage is reached, always brush using the chosen effect. Generally, one coat will be sufficient for full coverage.
      • For 'Island' Effect – Apply the product using a brush at 4 to 6 points of the wall and then continue applying more product leaving both smooth and textures areas.
      • For 'Striated' Effect – Brush the product onto the wall creating a series of linear marks in the desired direction.
    Prior to application, consult the Technical Data Sheet of the product and view the tutorial images and video below.
  • Advice: Do not apply in temperatures below 5°C or above 28°C. Carefully verify the surface area to be covered to avoid running short of product during the working process and reducing the risk of differences in tones.
    It is also advisable not to store or apply the finish below 5°C to protect it from freezing. Exposure to temperatures below 5°C could have an impact on the composition of the finish.
  • Note: wash tools with warm water immediately after use.

More Info

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register